Chinese wholesale Auto Repair Teaching And Training Equipment - Maintenance electrician technician and senior technician skill training assessment device – Zhiyang Beifang

Maintenance electrician technician and senior technician skill training assessment device

Type: BF-HK-G310

1. Input voltage: three-phase four-wire (or three-phase five-wire) ~ 380V±10% 50Hz

2. Working environment: temperature -10～＋40℃ relative humidity＜85%(25℃) altitude＜4000m

3. Device capacity: <1.5KVA

4. Weight: 100Kg

5. Dimensions: 1700×700×1630mm3

6. Leakage protection action current: ≤30mA; Leakage protection action time: ≤0.1s.

Feature

1. The electrical control circuit components are all installed on the mounting board as a hanging board, which is convenient to operate and replace, which is convenient for expanding functions or developing new training. The selection of operation content is typical and practical;

2. The console only needs three-phase four-wire AC power to be put into use;

3. The control circuit for skill training and the specially designed small motor can simulate various electric drive systems in the factory, and can meet the technical requirements of installation, debugging, fault analysis and elimination of maintenance electricians;

4. The device is equipped with voltage and current leakage protectors, which can ensure the safety of the operator’s life;

5. All components are led to the wiring terminals through wires, and students only need to wire on the terminals when wiring, which is beneficial to protect the components;

6. Carry out wiring through the wiring trough and conduct process wiring training.

7. It has a timing and alarm recorder, which provides a unified standard for the assessment of students’ training skills.

8. Use the current typical programmable controller and bus technology to complete the control training of simulation objects in industrial production, logic, simulation, process, motion, etc. in the physical model, and complete student cognition, design, installation, debugging, and maintenance And other skills training.

9. Fieldbus-based configuration monitoring training teaching: through the fieldbus network, the training device (slave) PLC and the master PLC for 1:N communication. The PLC of the slave station runs the program of the control object, using the centralized monitoring function of the industrial control network, the master station PLC can monitor any slave station PLC in real time, which meets the requirements of industrial field control. Students independently complete the control of various training objects through PLC, and carry out configuration real-time monitoring (1:1 communication).

10. Simulation training teaching: Real-time display of PLC running status through the FLASH virtual environment, PLC wiring, error checking, programming training, programming testing and other functions can also be realized.

Equipment

WX01 power supply, instrument control panel, experiment table, training hanging box

Equipment

Training Contents

1. Three-phase asynchronous motor direct start control circuit
2. Three-phase asynchronous motor jog control circuit
3. Three-phase asynchronous motor self-locking control circuit
4. Three-phase asynchronous motor button interlocking forward and reverse control circuit
5. Three-phase asynchronous motor contactor interlocking forward and reverse control circuit
6. Three-phase asynchronous motor double interlocking forward and reverse control circuit
7. Three-phase asynchronous motor worktable automatic reciprocating control circuit
8. Two three-phase asynchronous motors sequence start and sequence stop control circuit
9. Two-place control circuit of three-phase asynchronous motor
10. Y-△ control of contactor control 11. Y-△ control of time relay control
12. Three-phase asynchronous motor one-way start reverse brake control circuit
13. Three-phase asynchronous motor non-transformer half-wave rectification unidirectional start energy consumption
Brake control circuit
14. Three-phase asynchronous motor has transformer full-wave rectification and unidirectional start energy consumption
Brake control circuit
15. Three-phase asynchronous motor forward and reverse start energy consumption braking control circuit
16. Single-phase squirrel cage motor capacitor start control circuit
17. Two-speed AC asynchronous motor manual variable speed control circuit
18. Two-speed AC asynchronous motor automatic variable speed control circuit
19. Y-△ start control circuit of power-off delay DC dynamic braking
20. Three-phase asynchronous motor forward and reverse energy consumption braking control circuit

Photo Wall

Signing Ceremony

R&D

Signing Ceremony

Teachers