100% Original What Equipment Is Needed In The Car Training Room - High-performance intermediate maintenance electrician and skill training assessment training device – Zhiyang Beifang

High-performance intermediate maintenance electrician and skill training assessment training device

Type: BF-HK-G202

1. Input voltage: three-phase four-wire (or three-phase five-wire) ~ 380V±10% 50Hz

2. Working environment: temperature -10～＋40℃ relative humidity＜85%(25℃) altitude＜4000m

3. Device capacity: <1.5KVA

4. Weight: 100Kg

5. Dimensions: 1700×700×1630mm3

6. Leakage protection action current: ≤30mA; Leakage protection action time: ≤0.1s.

Feature

1. The electrical control circuit components are all installed on the mounting board as a hanging board, which is convenient to operate and replace, which is convenient for expanding functions or developing new training. The selection of operation content is typical and practical;

2. The console only needs three-phase four-wire AC power to be put into use;

3. The control circuit for skill training and the specially designed small motor can simulate various electric drive systems in the factory, and can meet the technical requirements of installation, debugging, fault analysis and elimination of maintenance electricians;

4. The device is equipped with voltage and current leakage protectors, which can ensure the safety of the operator’s life;

5. All components are led to the wiring terminals through wires, and students only need to wire on the terminals when wiring, which is beneficial to protect the components;

6. Carry out wiring through the wiring trough and conduct process wiring training.

7. It has a timing and alarm recorder, which provides a unified standard for the assessment of students’ training skills.

Equipment

Photo Wall

Signing Ceremony

R&D

Signing Ceremony

Teachers